How To Set Up A New Network

A Wi-Fi adapter makes it convenient to connect your Windows x laptop or desktop to the network and internet without dealing with cables. However, information technology's only user-friendly as long equally you lot know where to find the settings to connect.

Whether you lot're setting upward a device for the beginning time, connecting in a new place, or if y'all're looking for an efficient method to connect multiple devices to the aforementioned network, Windows 10 offers various means to connect to the internet using a Wi-Fi connection quickly.

In this Windows x guide, we walk you through the steps to connect to a Wi-Fi network using the network flyout in Taskbar, Settings, Control Panel and using command lines with Control Prompt.

How to connect to Wi-Fi network using Taskbar
How to connect to Wi-Fi network using Settings
How to connect to Wi-Fi network using Command Panel
How to connect to Wi-Fi network using Control Prompt

How to connect to Wi-Fi network using Taskbar

To connect to a Wi-Fi network through the taskbar, utilize these steps:

Click the Network icon in the bottom-correct corner of the taskbar.

Quick note: Alternatively, you can open Action Centre (Windows fundamental + A), and then click the Network push button in the Quick actions section to admission the network flyout. If you lot don't see the push, click the up arrow button on the left.
Select the wireless network to connect.
(Optional) Check the Connect automatically option.
Click the Connect push button.

Source: Windows Key

Quick tip: If you do not encounter whatsoever wireless admission indicate in the list, click the Wi-Fi button to turn on the adapter.
Confirm the network security key (password).

Source: Windows Key
Click the Side by side button.
Ostend whether the device should be discoverable in the network by other PCs.

Once you complete the steps, the laptop will connect to the network using the Wi-Fi connection.

Reconnect automatically

In addition, Windows 10 too offers an selection to reconnect the device automatically after disconnecting the adapter manually.

To set the Wi-Fi adapter to reconnect automatically on Windows 10, use these steps:

Click the network icon in the system tray.
Click the Wi-Fi button to turn off wireless connectivity.

Source: Windows Central
Use the drop-down carte and select when to re-connect automatically:
- Manually.
- In one hour.
- In iv hours.
- In ane day.
Source: Windows Central

Afterward yous complete the steps, Windows 10 won't endeavour to connect to a wireless connection until the fourth dimension you selected. When using this functionality, the device will simply connect automatically to the networks you have continued to in the by.

How to connect to Wi-Fi network using Settings

Using "Network & Security" settings, you tin as well add together wireless connections manually, and so when the network is in range, the device volition connect automatically.

To prevision a Wi-Fi connection on Windows 10, employ these steps:

Open Settings.
Click on Network & Security.
Click on Wi-Fi.
Click the Manage known networks option.

Source: Windows Central
Click the Add together a new network button.

Source: Windows Central
Ostend the proper name of the network.
Use the drop-down menu to select the Security type – For instance, WPA2-Personal AES.
Confirm the network security cardinal (password).

Source: Windows Central
Check the Connect automatically option.
Check the Connect even if this network is not dissemination selection (if required).
Click the Save button.

Once you complete the steps, the device will connect automatically when the wireless network is in range.

How to connect to Wi-Fi network using Command Panel

To connect to a Wi-Fi network with Control Panel, utilise these steps:

Open Control Panel.
Click on Network and Net.
Click on Network and Sharing Center.
Under the "Change your networking settings" section, click the Set a new connection or network option.

Source: Windows Key
Select the Manually connect to a wireless network selection.

Source: Windows Central
Click the Side by side button.
Confirm the network proper name.
Use the drib-down card to select the Security type — for example, WPA2-Personal.
Confirm the network security key (countersign).
Check the Start this connection automatically option.
(Optional) Bank check the Connect even if the network is not dissemination option.

Source: Windows Primal
Click the Side by side button.
Click the Close button.

Once you complete the steps, the laptop, tablet, or desktop will automatically connect to the Wi-Fi network.

How to connect to Wi-Fi network using Command Prompt

Alternatively, you tin can also use the netsh command-line tool in Command Prompt to connect to a Wi-Fi network.

To connect to a Wi-Fi admission bespeak with commands, use these steps:

Open Start.
Search for Command Prompt, correct-click the summit result, and select the Run every bit administrator option.
Type the following command to view the available network profiles and press Enter:

netsh wlan prove profile
Confirm the Wi-Fi network profile with your preferred settings.
Type the following command to connect to the wireless network on Windows 10 and printing Enter:

netsh wlan connect ssid=YOUR-WIFI-SSID proper noun=PROFILE-NAME

In the command, remember to specify the name (SSID) of the network and contour proper noun with your network settings.

For example, this command connects to the "tsunami" network using the "tsunami" contour:

netsh wlan connect ssid=tsunami name=tsunami

Source: Windows Cardinal

Quick Tip: On devices with more than 1 wireless adapter, you must also specify in the command which adapter you want to use. For example,: netsh wlan connect ssid=YOUR-WIFI-SSID name=PROFILE-NAME interface=Wi-Fi.

Later you complete the steps, the device will connect to the wireless network.

New network connection

The netsh tool also lets you manage Wi-Fi adapters and networks. The only caveat is that you tin can merely manage previously known networks since you cannot create new network profiles with this tool

When you need to use Control Prompt to connect i or multiple computers to the aforementioned wireless network, you tin can export the network contour created automatically during the starting time connection. Then you tin can import it using the netsh tool to connect using the command-line tool.

Export Wi-Fi profile

To export a Wi-Fi profile with commands, utilize these steps:

Open up Start.
Search for Command Prompt, correct-click the meridian outcome, and select the Run as administrator option.
Type the following command to view the available network profiles and press Enter:

netsh wlan show contour
Blazon the following command to export a profile and press Enter:

netsh wlan export contour Profile-NAME primal=clear folder=PATH\TO\EXPORT\Binder

For case, this command exports the tsunami profile to the "Documents" folder.

netsh wlan export profile tsunami central=clear folder=C:\Users\m\Documents

Source: Windows Central

Once you complete the steps, you lot can import the same XML file to connect other devices to the same network.

Import Wi-Fi profile

To import a Wi-Fi profile on Windows 10, use these steps:

Open Start.
Search for Command Prompt, right-click the elevation result, and select the Run as administrator option.
Type the post-obit command to determine the name of the network adapter and press Enter:

netsh wlan prove interfaces
Confirm the name of the adapter that volition connect to the network.
Type the following command to import the network contour and printing Enter:

netsh wlan add profile filename="PATH\TO\Contour.XML" Interface="YOUR-WIFI-ADAPTER-Proper name" user=current

In the command, make sure to specify the location of the XML file and network interface name.

For case, this command imports the xml contour located in the "Documents" folder to the Wi-Fi adapter:

netsh wlan add profile filename="C:\Users\one thousand\Documents\wi-fi-seismic sea wave.xml" Interface="WI-FI" user=current

Source: Windows Central
Type the following command to connect to the wireless network and press Enter:

netsh wlan connect ssid=YOUR-WIFI-SSID proper name=PROFILE-NAME

In the control, specify the SSID and profile name that corresponds to your network.

For example, this control connects to an access point using the "tsunami" SSID and "tsunami" profile name:

netsh wlan connect ssid=tsunami name=seismic sea wave

Quick tip: If you have multiple wireless interfaces, you must also specify in the command which adapter you want to use. For instance, netsh wlan connect ssid=YOUR-WIFI-SSID name=Profile-Proper noun interface=Wi-Fi.

Later on you consummate the steps, the computer should connect to the wireless network automatically.

More Windows resources

For more helpful articles, coverage, and answers to common questions about Windows 10 and Windows 11, visit the following resource:

Windows ten on Windows Central — All yous need to know
Windows x help, tips, and tricks
Windows eleven on Windows Primal — All you need to know

Here's why 'saving' Surface Neo by putting Android on it makes sense

Information technology could piece of work

Here's why 'saving' Surface Neo by putting Android on information technology makes sense

Surface Neo was never officially canceled, but it's also unofficially never coming. What should Microsoft do with the design? It's too pocket-size for Windows 11, and at that place'due south no Windows 10X. Would Android be a skilful fit? It seems to be working for Surface Duo, which is nothing more a smaller version.